Liteplan Emergency lighting specialists

Mon - Thurs : 8:30 - 17:00 Fri : 8:30 - 14:00

Products

TLP/2/SP85/R High Voltage High Output Basic Conversion

The TLP/2/SP85/R, is a high voltage, high output 3-hour switchable emergency lighting module designed to suit a wide range of LED types, circuits and applications. Whilst the TLP/2/SP85/R is designed for high voltage LEDs or longer linear applications, it can run certain self-driven lamps such as GU10s (subject to testing). The unit is designed to work with lithium iron phosphate (LiFePO4) batteries and is supplied in an IP20 enclosure with a easy access panel for the future replacement of batteries. The module automatically adjusts the output current to provide the best match between the battery and the load, providing maximum illumination whilst ensuring full battery duration. The pack features a green charge healthy/fault indicator LED on a flying lead. This range uses the latest LiFePO4 battery technology, dramatically reducing energy consumption and facilities management labour. All our batteries feature temperature monitoring. In keeping with the latest update to BS EN 61347-2-7 Their associated modules will stop charging the cells if their case temperature falls below 0°C or rises above 55°C. The emergency packs will continue to operate where required, providing their is enough capacity remaining in the battery. Our lithium iron phosphate cells feature a low self-discharge of 5% per month. The TLP range has been independently certified by TÜV to ensure that the product, has been tested for safety and that it complies with the requirements of national and international regulations.

Order Codes

Order CodeDescription
TNA/2/SP85/RModule and three cell battery housed in IP20 enclosure with a bi-colour charge/fault indicator for
50-300V loads. Suitable for remote mounting.

TLP/2/SP85/R High Voltage High Output Basic Conversion

Specifications

  • TÜV Tested and Certified
  • High Output for Higher Power Luminaires
  • Long Life LiFePO4 Batteries
  • Suitable for a Wide Range of LED Loads and Configurations
  • Operates Loads between 50V and 300V
  • Can operate some Self Driven Lamps like GU10 (subject to testing)
  • Average Emergency Output of 4.4W
  • LiFePO4 Automatic Battery Protection and Recovery
TLP/2/SP85/R
LED Voltage Range 55-300V
I Rated88mA - 14mA
P Rated4.4W
Open Circuit Voltage350V
Battery Current Limit900mA
Mains Supply230-240V AC 50/60Hz
Power Rating (charging)3.7W 20mA λ = 0.74
Power Rating (standby)1.4W 10mA λ = 0.57
Charge Current225mA nominal
Recharge Period24 hours
Battery Pack6.4V 3.8Ah LiFePO4
Battery Cut Off5V
Ambient Temperature (Ta)5°C to 35°C
Case Temperature (Tc)5°C to 55°C
Enclosure Dimensions320mm x 75mm x 31mm

TLP/2/SP85/R High Voltage High Output Basic Conversion

The TLP/2/SP85/R, is a high voltage, high output 3-hour switchable emergency lighting module designed to suit a wide range of LED types, circuits and applications. Whilst the TLP/2/SP85/R is designed for high voltage LEDs or longer linear applications, it can run certain self-driven lamps such as GU10s (subject to testing). The unit is designed to work with lithium iron phosphate (LiFePO4) batteries and is supplied in an IP20 enclosure with a easy access panel for the future replacement of batteries. The module automatically adjusts the output current to provide the best match between the battery and the load, providing maximum illumination whilst ensuring full battery duration. The pack features a green charge healthy/fault indicator LED on a flying lead. This range uses the latest LiFePO4 battery technology, dramatically reducing energy consumption and facilities management labour. All our batteries feature temperature monitoring. In keeping with the latest update to BS EN 61347-2-7 Their associated modules will stop charging the cells if their case temperature falls below 0°C or rises above 55°C. The emergency packs will continue to operate where required, providing their is enough capacity remaining in the battery. Our lithium iron phosphate cells feature a low self-discharge of 5% per month. The TLP range has been independently certified by TÜV to ensure that the product, has been tested for safety and that it complies with the requirements of national and international regulations.

Order Codes

Order CodeDescription
TNA/2/SP85/RModule and three cell battery housed in IP20 enclosure with a bi-colour charge/fault indicator for
50-300V loads. Suitable for remote mounting.

TLP/2/SP85/R High Voltage High Output Basic Conversion

Specifications

  • TÜV Tested and Certified
  • High Output for Higher Power Luminaires
  • Long Life LiFePO4 Batteries
  • Suitable for a Wide Range of LED Loads and Configurations
  • Operates Loads between 50V and 300V
  • Can operate some Self Driven Lamps like GU10 (subject to testing)
  • Average Emergency Output of 4.4W
  • LiFePO4 Automatic Battery Protection and Recovery
TLP/2/SP85/R
LED Voltage Range 55-300V
I Rated88mA - 14mA
P Rated4.4W
Open Circuit Voltage350V
Battery Current Limit900mA
Mains Supply230-240V AC 50/60Hz
Power Rating (charging)3.7W 20mA λ = 0.74
Power Rating (standby)1.4W 10mA λ = 0.57
Charge Current225mA nominal
Recharge Period24 hours
Battery Pack6.4V 3.8Ah LiFePO4
Battery Cut Off5V
Ambient Temperature (Ta)5°C to 35°C
Case Temperature (Tc)5°C to 55°C
Enclosure Dimensions320mm x 75mm x 31mm

Follow us on our socials