Liteplan Emergency lighting specialists

Mon - Thurs : 8:30 - 17:00 Fri : 8:30 - 14:00

Products

TLP/1S/TP40/R Two-Part High Voltage Basic Conversion

The TLP/1S/TP40/R, is a two part remote, 3-hour switchable emergency lighting module designed to suit a wide range of LED types, circuits and applications. Whilst the TLP/1S/TP40/R is designed for high voltage LEDs or longer linear applications, it can run certain self-driven lamps like GU10s (subject to testing). The unit operates with lithium iron phosphate (LiFePO4) batteries and is supplied as a pre-wired two part pack for mounting remotely from the luminaire where integral mounting is not possible. The pack will pass through a 40mm, or greater, aperture. The module automatically adjusts the output current to provide the best match between the battery and the load, providing maximum illumination whilst ensuring full battery duration. The module is supplied with a green charge healthy indicator LED. All our batteries feature temperature monitoring. In keeping with the latest update to BS EN 61347-2-7 Their associated modules will stop charging the cells if their case temperature falls below 0°C or rises above 55°C. The emergency packs will continue to operate where required, providing their is enough capacity remaining in the battery. Our lithium iron phosphate cells feature a low self-discharge of 5% per month. The TLP range has been independently certified by TÜV to ensure that the product, has been tested for safety and that it complies with the requirements of national and international regulations.

Order Codes

Order CodeDescription
TLP/1S/TP40/R Module, three cell battery and charge LED indicator for 55-300 Volt LED loads
suitable for remote mounting adjacent to the luminaire.

TLP/1S/TP40/R Two-Part High Voltage Basic Conversion

Specifications

  • Long Life LiFePO4 Batteries
  • Slim Module Suitable for Smaller Apertures
  • Strain Relief Module and Batteries with Cables
  • Suitable for a Wide Range of LED Loads
  • Operates Loads between 55V and 300V
  • Can operate some Self Driven Lamps like GU10 (subject to testing)
  • Average Emergency Output of 2.4W
  • TÜV Tested and Certified
  • LiFePO4 Automatic Battery Protection and Recovery
TLP/1S/TP40/R
LED Voltage Range 55-300V
I Rated38mA - 7mA
P Rated3W - 80W
LED Voltage Limit340V
Battery Current Limit1100mA
Mains Supply230-240V AC 50/60Hz
Power Rating (Charging)2.5W 15mA λ = 0.70
Power Rating (Standby)1.3W 9mA λ = 0.60
Charge Current225mA nominal
Recharge Period 24-hours
Battery Pack 3.2V 4.8Ah LiFePO4
Battery Cut Off2.5V
Ambient Temperature (Ta)5°C to 35°C
Case Temperature (Tc)5°C to 55°C
Integral Kit SizeModule - 266mm x 33.6mm x 22.5mm FC=259mm Battery - 220.5mm x 32mm x 28.1mm

TLP/1S/TP40/R Two-Part High Voltage Basic Conversion

The TLP/1S/TP40/R, is a two part remote, 3-hour switchable emergency lighting module designed to suit a wide range of LED types, circuits and applications. Whilst the TLP/1S/TP40/R is designed for high voltage LEDs or longer linear applications, it can run certain self-driven lamps like GU10s (subject to testing). The unit operates with lithium iron phosphate (LiFePO4) batteries and is supplied as a pre-wired two part pack for mounting remotely from the luminaire where integral mounting is not possible. The pack will pass through a 40mm, or greater, aperture. The module automatically adjusts the output current to provide the best match between the battery and the load, providing maximum illumination whilst ensuring full battery duration. The module is supplied with a green charge healthy indicator LED. All our batteries feature temperature monitoring. In keeping with the latest update to BS EN 61347-2-7 Their associated modules will stop charging the cells if their case temperature falls below 0°C or rises above 55°C. The emergency packs will continue to operate where required, providing their is enough capacity remaining in the battery. Our lithium iron phosphate cells feature a low self-discharge of 5% per month. The TLP range has been independently certified by TÜV to ensure that the product, has been tested for safety and that it complies with the requirements of national and international regulations.

Order Codes

Order CodeDescription
TLP/1S/TP40/R Module, three cell battery and charge LED indicator for 55-300 Volt LED loads
suitable for remote mounting adjacent to the luminaire.

TLP/1S/TP40/R Two-Part High Voltage Basic Conversion

Specifications

  • Long Life LiFePO4 Batteries
  • Slim Module Suitable for Smaller Apertures
  • Strain Relief Module and Batteries with Cables
  • Suitable for a Wide Range of LED Loads
  • Operates Loads between 55V and 300V
  • Can operate some Self Driven Lamps like GU10 (subject to testing)
  • Average Emergency Output of 2.4W
  • TÜV Tested and Certified
  • LiFePO4 Automatic Battery Protection and Recovery
TLP/1S/TP40/R
LED Voltage Range 55-300V
I Rated38mA - 7mA
P Rated3W - 80W
LED Voltage Limit340V
Battery Current Limit1100mA
Mains Supply230-240V AC 50/60Hz
Power Rating (Charging)2.5W 15mA λ = 0.70
Power Rating (Standby)1.3W 9mA λ = 0.60
Charge Current225mA nominal
Recharge Period 24-hours
Battery Pack 3.2V 4.8Ah LiFePO4
Battery Cut Off2.5V
Ambient Temperature (Ta)5°C to 35°C
Case Temperature (Tc)5°C to 55°C
Integral Kit SizeModule - 266mm x 33.6mm x 22.5mm FC=259mm Battery - 220.5mm x 32mm x 28.1mm

Follow us on our socials