Products
- Got a question?
- Ask a product specialist...
- +44 (0) 1708 372 223
Overview
Specification
Documentation
Overview
Halo Surface Square MyMesh
A square surface mount standalone 3-hour emergency LED, featuring our Halo effect charge/fault indicator. The light source is available with either open-area (anti panic) which emits 268 lumen, or a corridor (escape route) optic that emits 266 lumen. The Halo Surface range operates with the latest LiFePO4 batteries that not only last far longer than traditional emergency lighting batteries, but consume far less power.
The product is available in either white (RAL9016) or black (RAL9005) and is supplied ready for connection to a MyMesh wireless control system.
All our batteries feature temperature monitoring. In keeping with the latest update to BS EN 61347-2-7 Their associated modules will stop charging the cells if their case temperature falls below 0°C or rises above 55°C. The emergency packs will continue to operate where required, providing their is enough capacity remaining in the battery. Our lithium iron phosphate cells feature a low self-discharge of 5% per month.
Order Codes
| Order Code | Description | ||
|---|---|---|---|
| CSW/1/NM/CO/MYMESH | White Non-maintained c/w Corridor Lens | ||
| CSB/1/NM/CO/MYMESH | Black Non-maintained c/w Corridor Lens | ||
| CSW/1/NM/OA/MYMESH | White Non-maintained c/w Open Area Lens | ||
| CSB/1/NM/OA/MYMESH | Black Non-maintained c/w Open Area Lens |
Specification
Halo Surface Square MyMesh
Specifications
- Ready for Connection to a MyMesh Wireless Control System
- Square Surface Mount Emergency LED
- Corridor or Open Area Optics Available
- Available as either White or Black
- LiFePO4 Automatic Battery Protection and Recovery
- Up to 268 Delivered Lumen
| CS/CO/MYMESHCS/OA/MYMESH | |
| Lens | Corridor LensOpen Area Lens |
| Beam angle | 115° x 155°135° |
| Input Voltage | 230-240 Volts AC – 50/60Hz |
| Power Rating Charged * | 0.26W 8mA λ = 0.14 |
| Power Rating Charging * | 5W 28mA λ = 0.74 |
| Emergency Duration | 3-Hours |
| Light Source | 1 x 2W |
| Battery Type | LiFePO4 |
| Battery Voltage | 3.2V |
| Battery Capacity | 3.8Ah |
| Charge Current | 225mA Nominal |
| Recharge Time | 24-Hours |
| Ambient Temperature | 0°C to 35°C |
| Ingress Protection | IP20 |
| Dimensions | 155mm x 155mm x 58mm |
| Weight | 0.5kg |
* Following its initial charge, this product will spend 90% of its operational life in standby mode.
Documentation
Halo Surface Square MyMesh
A square surface mount standalone 3-hour emergency LED, featuring our Halo effect charge/fault indicator. The light source is available with either open-area (anti panic) which emits 268 lumen, or a corridor (escape route) optic that emits 266 lumen. The Halo Surface range operates with the latest LiFePO4 batteries that not only last far longer than traditional emergency lighting batteries, but consume far less power.
The product is available in either white (RAL9016) or black (RAL9005) and is supplied ready for connection to a MyMesh wireless control system.
All our batteries feature temperature monitoring. In keeping with the latest update to BS EN 61347-2-7 Their associated modules will stop charging the cells if their case temperature falls below 0°C or rises above 55°C. The emergency packs will continue to operate where required, providing their is enough capacity remaining in the battery. Our lithium iron phosphate cells feature a low self-discharge of 5% per month.
Order Codes
| Order Code | Description | ||
|---|---|---|---|
| CSW/1/NM/CO/MYMESH | White Non-maintained c/w Corridor Lens | ||
| CSB/1/NM/CO/MYMESH | Black Non-maintained c/w Corridor Lens | ||
| CSW/1/NM/OA/MYMESH | White Non-maintained c/w Open Area Lens | ||
| CSB/1/NM/OA/MYMESH | Black Non-maintained c/w Open Area Lens |
Halo Surface Square MyMesh
Specifications
- Ready for Connection to a MyMesh Wireless Control System
- Square Surface Mount Emergency LED
- Corridor or Open Area Optics Available
- Available as either White or Black
- LiFePO4 Automatic Battery Protection and Recovery
- Up to 268 Delivered Lumen
| CS/CO/MYMESHCS/OA/MYMESH | |
| Lens | Corridor LensOpen Area Lens |
| Beam angle | 115° x 155°135° |
| Input Voltage | 230-240 Volts AC – 50/60Hz |
| Power Rating Charged * | 0.26W 8mA λ = 0.14 |
| Power Rating Charging * | 5W 28mA λ = 0.74 |
| Emergency Duration | 3-Hours |
| Light Source | 1 x 2W |
| Battery Type | LiFePO4 |
| Battery Voltage | 3.2V |
| Battery Capacity | 3.8Ah |
| Charge Current | 225mA Nominal |
| Recharge Time | 24-Hours |
| Ambient Temperature | 0°C to 35°C |
| Ingress Protection | IP20 |
| Dimensions | 155mm x 155mm x 58mm |
| Weight | 0.5kg |
* Following its initial charge, this product will spend 90% of its operational life in standby mode.
Halo Surface Square MyMesh
A square surface mount standalone 3-hour emergency LED, featuring our Halo effect charge/fault indicator. The light source is available with either open-area (anti panic) which emits 268 lumen, or a corridor (escape route) optic that emits 266 lumen. The Halo Surface range operates with the latest LiFePO4 batteries that not only last far longer than traditional emergency lighting batteries, but consume far less power.
The product is available in either white (RAL9016) or black (RAL9005) and is supplied ready for connection to a MyMesh wireless control system.
All our batteries feature temperature monitoring. In keeping with the latest update to BS EN 61347-2-7 Their associated modules will stop charging the cells if their case temperature falls below 0°C or rises above 55°C. The emergency packs will continue to operate where required, providing their is enough capacity remaining in the battery. Our lithium iron phosphate cells feature a low self-discharge of 5% per month.
Order Codes
| Order Code | Description | ||
|---|---|---|---|
| CSW/1/NM/CO/MYMESH | White Non-maintained c/w Corridor Lens | ||
| CSB/1/NM/CO/MYMESH | Black Non-maintained c/w Corridor Lens | ||
| CSW/1/NM/OA/MYMESH | White Non-maintained c/w Open Area Lens | ||
| CSB/1/NM/OA/MYMESH | Black Non-maintained c/w Open Area Lens |
Halo Surface Square MyMesh
Specifications
- Ready for Connection to a MyMesh Wireless Control System
- Square Surface Mount Emergency LED
- Corridor or Open Area Optics Available
- Available as either White or Black
- LiFePO4 Automatic Battery Protection and Recovery
- Up to 268 Delivered Lumen
| CS/CO/MYMESHCS/OA/MYMESH | |
| Lens | Corridor LensOpen Area Lens |
| Beam angle | 115° x 155°135° |
| Input Voltage | 230-240 Volts AC – 50/60Hz |
| Power Rating Charged * | 0.26W 8mA λ = 0.14 |
| Power Rating Charging * | 5W 28mA λ = 0.74 |
| Emergency Duration | 3-Hours |
| Light Source | 1 x 2W |
| Battery Type | LiFePO4 |
| Battery Voltage | 3.2V |
| Battery Capacity | 3.8Ah |
| Charge Current | 225mA Nominal |
| Recharge Time | 24-Hours |
| Ambient Temperature | 0°C to 35°C |
| Ingress Protection | IP20 |
| Dimensions | 155mm x 155mm x 58mm |
| Weight | 0.5kg |
* Following its initial charge, this product will spend 90% of its operational life in standby mode.