Liteplan Emergency lighting specialists

Mon - Thurs : 8:30 - 17:00 Fri : 8:30 - 14:00

Products

D2N/2/WP100/R Weatherproof High Output DALI-2 Addressable

A high output, 3-hour DALI-2 self-test emergency lighting conversion kit, designed to suit an extremely wide range of LED types and circuits. The D2N/2/WP100/R automatically adjust the output LED current to provide the best match between the battery and the load, providing maximum illumination whilst ensuring full battery duration. The D2N/2/WP100/R converts LED loads in the lower SELV threshold <60V between 10-60V and the D2N/2/80/WP100/R will operate LED loads between 10 and 80V forward. This product is fully DALI-2 compliant and in keeping with the DALI Standard, if the module is commissioned without a DALI control system present, the unit will revert to standalone self-test, indicating its faults via the charge LED. The entire emergency pack is housed within an IP54 rated enclosure which features an IP65 rated bi-colour LED for charge healthy/fault indication. All our batteries feature temperature monitoring. In keeping with the latest update to BS EN 61347-2-7 Their associated modules will stop charging the cells if their case temperature falls below 0°C or rises above 55°C. The emergency packs will continue to operate where required, providing their is enough capacity remaining in the battery. Our lithium iron phosphate cells feature a low self-discharge of 5% per month. The D2N range has been independently certified by TÜV to ensure that the product, has been tested for safety and that it complies with the requirements of national and international regulations.

Order Codes

Order CodeDescription
D2N/2/WP100/R10-55V Module and two cell battery housed in an IP54 rated enclosure with an IP65 rated LED. For loads up to 2A
D2N/2/80/WP100/R10-80V Module and two cell battery housed in an IP54 rated enclosure with an IP65 rated LED. For loads up to 2A
D2N/2/HI/WP200/R10-55V Module and two cell battery housed in an IP54 rated enclosure with an IP65 rated LED. For loads up to 8A

D2N/2/WP100/R Weatherproof High Output DALI-2 Addressable

Specifications

  • DiiA Certified DALI-2 Device
  • IP54 Enclosure for Damp or Wet Locations
  • 2-pole Changeover Relay
  • Additional 3rd Pole Relay for Driver Protection
  • Deep Discharge Protection
  • Intelligent, Low Energy Charging Circuit
  • Extra Long Life LiFePO4 Cells
  • Average Emergency Output of 5.0W
  • LiFePO4 Automatic Battery Protection and Recovery
D2N/2/WP100/RD2N/2/80/WP100/R
LED Voltage Range10-55V10-80V
I Rated400mA - 91mA400mA - 62mA
P Rated3W - 80W3W - 80W
LED Voltage Limit55V80V
Battery Current Limit950mA
Power Rating (Charging) *2.8W 17mA λ = 0.70
Power Rating (Standby) *1.4W 12mA λ = 0.48
Charge Current225mA nominal
Recharge Period24-hours
Battery Pack6.4V 3.8Ah LiFePO4
Battery Cut-Off5V
Ambient Temperature (Ta)Module and Battery 5 to 35°C
Case Temperature (Tc)Battery 5 to 55°C, Module 5 to 70°C
Enclosure Dimensions 250mm x 80mm x 70mm

* Following its initial charge, the D2N/2 will spend 90% of its operational life in standby mode.

D2N/2/WP100/R Weatherproof High Output DALI-2 Addressable

A high output, 3-hour DALI-2 self-test emergency lighting conversion kit, designed to suit an extremely wide range of LED types and circuits. The D2N/2/WP100/R automatically adjust the output LED current to provide the best match between the battery and the load, providing maximum illumination whilst ensuring full battery duration. The D2N/2/WP100/R converts LED loads in the lower SELV threshold <60V between 10-60V and the D2N/2/80/WP100/R will operate LED loads between 10 and 80V forward. This product is fully DALI-2 compliant and in keeping with the DALI Standard, if the module is commissioned without a DALI control system present, the unit will revert to standalone self-test, indicating its faults via the charge LED. The entire emergency pack is housed within an IP54 rated enclosure which features an IP65 rated bi-colour LED for charge healthy/fault indication. All our batteries feature temperature monitoring. In keeping with the latest update to BS EN 61347-2-7 Their associated modules will stop charging the cells if their case temperature falls below 0°C or rises above 55°C. The emergency packs will continue to operate where required, providing their is enough capacity remaining in the battery. Our lithium iron phosphate cells feature a low self-discharge of 5% per month. The D2N range has been independently certified by TÜV to ensure that the product, has been tested for safety and that it complies with the requirements of national and international regulations.

Order Codes

Order CodeDescription
D2N/2/WP100/R10-55V Module and two cell battery housed in an IP54 rated enclosure with an IP65 rated LED. For loads up to 2A
D2N/2/80/WP100/R10-80V Module and two cell battery housed in an IP54 rated enclosure with an IP65 rated LED. For loads up to 2A
D2N/2/HI/WP200/R10-55V Module and two cell battery housed in an IP54 rated enclosure with an IP65 rated LED. For loads up to 8A

D2N/2/WP100/R Weatherproof High Output DALI-2 Addressable

Specifications

  • DiiA Certified DALI-2 Device
  • IP54 Enclosure for Damp or Wet Locations
  • 2-pole Changeover Relay
  • Additional 3rd Pole Relay for Driver Protection
  • Deep Discharge Protection
  • Intelligent, Low Energy Charging Circuit
  • Extra Long Life LiFePO4 Cells
  • Average Emergency Output of 5.0W
  • LiFePO4 Automatic Battery Protection and Recovery
D2N/2/WP100/RD2N/2/80/WP100/R
LED Voltage Range10-55V10-80V
I Rated400mA - 91mA400mA - 62mA
P Rated3W - 80W3W - 80W
LED Voltage Limit55V80V
Battery Current Limit950mA
Power Rating (Charging) *2.8W 17mA λ = 0.70
Power Rating (Standby) *1.4W 12mA λ = 0.48
Charge Current225mA nominal
Recharge Period24-hours
Battery Pack6.4V 3.8Ah LiFePO4
Battery Cut-Off5V
Ambient Temperature (Ta)Module and Battery 5 to 35°C
Case Temperature (Tc)Battery 5 to 55°C, Module 5 to 70°C
Enclosure Dimensions 250mm x 80mm x 70mm

* Following its initial charge, the D2N/2 will spend 90% of its operational life in standby mode.

Follow us on our socials