Liteplan Emergency lighting specialists

Mon - Thurs : 8:30 - 17:00 Fri : 8:30 - 14:00

Products

TLP/1S High Voltage Basic Conversion

The TLP/1S, is a high quality 3 hour switchable emergency lighting module designed to suit a wide range of LED types, circuits and applications. Whilst the TLP is designed for high voltage LEDs or longer linear applications, it can run certain self-driven lamps like GU10s (subject to testing). The unit is designed to work with lithium iron phosphate (LiFePO4) batteries and is available in 2 versions, one with PCB terminal blocks, for internal mounting inside a luminaire, or a pre-wired version for mounting remotely from the luminaire where integral mounting is not possible. The module automatically adjusts the output current to provide the best match between the battery and the load, providing maximum illumination whilst ensuring full battery duration. The module is supplied with a green charge healthy indicator LED. All our batteries feature temperature monitoring. In keeping with the latest update to BS EN 61347-2-7 Their associated modules will stop charging the cells if their case temperature falls below 0°C or rises above 55°C. The emergency packs will continue to operate where required, providing their is enough capacity remaining in the battery. Our lithium iron phosphate cells feature a low self-discharge of 5% per month. The TLP range has been independently certified by TÜV to ensure that the product, has been tested for safety and that it complies with the requirements of national and international regulations.  

Order Codes

Order CodeDescription
TLP/1S-KModule, three cell battery and charge LED indicator for 55-300 Volt LED loads
suitable for mounting inside the luminaire
TLP/1S/IP65 Module, three cell battery housed in an IP65 enclosure with IP rated charge indicator
for 55-300V loads. Suitable for remote mounting in damp or wet locations

TLP/1S High Voltage Basic Conversion

Specifications

  • TÜV Tested and Certified
  • Slim Module Suitable for Linear Applications
  • Long Life LiFePO4 Batteries
  • Also Available as a Strain Relief Module with Cables
  • Suitable for a Wide Range of LED Loads
  • Operates Loads between 50V and 300V
  • Can operate some Self Driven Lamps like GU10 (subject to testing)
  • Average Emergency Output of 2.4W
  • LiFePO4 Automatic Battery Protection and Recovery
TLP/1S
LED Voltage Range55-300V
I Rated38mA - 7mA
P Rated3W - 80W
Open Circuit Voltage340V
Battery Discharge Current900mA
Mains Supply230-240V AC 50/60Hz
Power Rating (charging) *2.5W 15mA λ = 0.70
Power Rating (standby) *1.3W 9mA λ = 0.60
Charge Current225mA nominal
Recharge Period24 hours
Battery Pack3.2V 4.8Ah LiFePO4
Battery Cut Off2.5V
Ambient Temperature (Ta)5°C to 35°C
Battery Case Temperature (Tc)5°C to 55°C
Module Case Temperature (Tc)5°C to 70°C
Integral Kit SizeModule - 215mm x 30mm x 22.5mm FC=206mm Battery - 230mm x 24mm x 22mm FC=220mm

Follow us on our socials