Liteplan Emergency lighting specialists

Mon - Thurs : 8:30 - 17:00 Fri : 8:30 - 14:00

Products

T2N/2/SP85/R High Voltage DALI-2 Addressable

The T2N/2/SP85/R, is a high quality DALI-2 Self-Test 3-hour switchable emergency lighting module designed to suit a wide range of LED types, circuits and applications. Whilst the T2N/2/SP85/R is designed for high voltage LEDs or longer linear applications, it can run certain self-driven lamps such as GU10s (subject to testing). The unit is designed to work with lithium iron phosphate (LiFePO4) batteries and is supplied in an IP20 enclosure with a easy access panel for the future replacement of batteries. The module automatically adjusts the output current to provide the best match between the battery and the load, providing maximum illumination whilst ensuring full battery duration. The pack features a bi-colour charge healthy/fault indicator LED on a flying lead. This range uses the latest LiFePO4 battery technology, dramatically reducing energy consumption and facilities management labour. If a DALI bus is not connected to the T2N/2/SP85/R, then the unit will operate as a standalone self-test unit, reporting faults via a red indication of the charge LED. All our batteries feature temperature monitoring. In keeping with the latest update to BS EN 61347-2-7 Their associated modules will stop charging the cells if their case temperature falls below 0°C or rises above 55°C. The emergency packs will continue to operate where required, providing their is enough capacity remaining in the battery. Our lithium iron phosphate cells feature a low self-discharge of 5% per month.

Order Codes

Order CodeDescription
T2N/2/SP85/RModule and three cell battery housed in IP20 enclosure with a bi-colour charge/fault indicator for
50-300V loads. Suitable for remote mounting.

T2N/2/SP85/R High Voltage DALI-2 Addressable

Specifications

  • DALI-2 Self-Test Conversion Kit
  • High Output for Higher Power Luminaires
  • Long Life LiFePO4 Batteries
  • Suitable for a Wide Range of LED Loads and Configurations
  • Operates Loads between 50V and 300V
  • Can operate some Self Driven Lamps like GU10 (subject to testing)
  • Average Emergency Output of 4.3W
  • LiFePO4 Automatic Battery Protection and Recovery
T2N/2/SP85/R
LED Voltage Range 55-300V
I Rated85mA - 14mA
P Rated4.3W
Open Circuit Voltage350V
Battery Current Limit950mA
Mains Supply230-240V AC 50/60Hz
Power Rating (charging)3.9W 21mA λ = 0.77
Power Rating (standby)1.4W 12mA λ = 0.47
Charge Current225mA nominal
Recharge Period24 hours
Battery Pack6.4V 3.8Ah LiFePO4
Battery Cut Off5V
Ambient Temperature (Ta)5°C to 35°C
Case Temperature (Tc)5°C to 55°C
Enclosure Dimensions320mm x 75mm x 31mm

T2N/2/SP85/R High Voltage DALI-2 Addressable

The T2N/2/SP85/R, is a high quality DALI-2 Self-Test 3-hour switchable emergency lighting module designed to suit a wide range of LED types, circuits and applications. Whilst the T2N/2/SP85/R is designed for high voltage LEDs or longer linear applications, it can run certain self-driven lamps such as GU10s (subject to testing). The unit is designed to work with lithium iron phosphate (LiFePO4) batteries and is supplied in an IP20 enclosure with a easy access panel for the future replacement of batteries. The module automatically adjusts the output current to provide the best match between the battery and the load, providing maximum illumination whilst ensuring full battery duration. The pack features a bi-colour charge healthy/fault indicator LED on a flying lead. This range uses the latest LiFePO4 battery technology, dramatically reducing energy consumption and facilities management labour. If a DALI bus is not connected to the T2N/2/SP85/R, then the unit will operate as a standalone self-test unit, reporting faults via a red indication of the charge LED. All our batteries feature temperature monitoring. In keeping with the latest update to BS EN 61347-2-7 Their associated modules will stop charging the cells if their case temperature falls below 0°C or rises above 55°C. The emergency packs will continue to operate where required, providing their is enough capacity remaining in the battery. Our lithium iron phosphate cells feature a low self-discharge of 5% per month.

Order Codes

Order CodeDescription
T2N/2/SP85/RModule and three cell battery housed in IP20 enclosure with a bi-colour charge/fault indicator for
50-300V loads. Suitable for remote mounting.

T2N/2/SP85/R High Voltage DALI-2 Addressable

Specifications

  • DALI-2 Self-Test Conversion Kit
  • High Output for Higher Power Luminaires
  • Long Life LiFePO4 Batteries
  • Suitable for a Wide Range of LED Loads and Configurations
  • Operates Loads between 50V and 300V
  • Can operate some Self Driven Lamps like GU10 (subject to testing)
  • Average Emergency Output of 4.3W
  • LiFePO4 Automatic Battery Protection and Recovery
T2N/2/SP85/R
LED Voltage Range 55-300V
I Rated85mA - 14mA
P Rated4.3W
Open Circuit Voltage350V
Battery Current Limit950mA
Mains Supply230-240V AC 50/60Hz
Power Rating (charging)3.9W 21mA λ = 0.77
Power Rating (standby)1.4W 12mA λ = 0.47
Charge Current225mA nominal
Recharge Period24 hours
Battery Pack6.4V 3.8Ah LiFePO4
Battery Cut Off5V
Ambient Temperature (Ta)5°C to 35°C
Case Temperature (Tc)5°C to 55°C
Enclosure Dimensions320mm x 75mm x 31mm

Follow us on our socials