Liteplan Emergency lighting specialists

Mon - Thurs : 8:30 - 17:00 Fri : 8:30 - 14:00

Products

T2N/1S/TP40/R Two-Part High Voltage DALI-2 Addressable

The T2N/1S/TP40/R, is a high-quality DALI-2 Self-Test 3-hour switchable emergency lighting module designed to suit a wide range of LED types, circuits and applications. Whilst the T2N/1S/TP40/R is designed for high voltage LEDs or longer linear applications, it can run certain self-driven lamps such as GU10s (subject to testing). The unit is designed to work with lithium iron phosphate (LiFePO4) batteries. The module automatically adjusts the output current to provide the best match between the battery and the load, providing maximum illumination whilst ensuring full battery duration. The pack features a bi-colour charge healthy/fault indicator LED on a flying lead. This range uses the latest LiFePO4 battery technology, dramatically reducing energy consumption and facilities management labour. If a DALI bus is not connected to the T2N/1S/TP40, then the unit will operate as a standalone self-test unit, reporting faults via a red indication of the charge LED. All our batteries feature temperature monitoring. In keeping with the latest update to BS EN 61347-2-7 Their associated modules will stop charging the cells if their case temperature falls below 0°C or rises above 55°C. The emergency packs will continue to operate where required, providing their is enough capacity remaining in the battery. Our lithium iron phosphate cells feature a low self-discharge of 5% per month.

Order Codes

Order CodeDescription
T2N/1S/TP40/R Module, three cell battery and charge LED indicator for 55-300 Volt LED loads
suitable for remote mounting adjacent to the luminaire.

T2N/1S/TP40/R Two-Part High Voltage DALI-2 Addressable

Specifications

  • Long Life LiFePO4 Batteries
  • DALI-2 Addressable Two-Part Conversion Kit
  • Slim Module Suitable for Smaller Apertures
  • Strain Relief Module and Batteries with Cables
  • Suitable for a Wide Range of LED Loads
  • Operates Loads between 55V and 300V
  • Average Emergency Output of 2.3W
  • Can Operate Some Self-Driven Lamps e.g., GU10 (subject to testing)
  • LiFePO4 Automatic Battery Protection and Recovery
T2N/1S/TP40/R
LED Voltage Range 55-300V
I Rated46mA - 7mA
P Rated3W - 80W
LED Voltage Limit350V
Bat. Current Limit1100mA
Mains Supply230-240V AC 50/60Hz
Power Rating (Charging)2.7W 16mA λ = 0.68
Power Rating (Standby)1.4W 12mA λ = 0.48
Charge Current225mA nominal
Recharge Period 24-hours
Battery Pack 3.2V 4.8Ah LiFePO4
Battery Cut Off2.5V
Ta5°C to 25°C
Tc5°C to 55°C
Integral Kit SizeModule - 266mm x 33.6mm x 22.5mm FC=259mm Battery - 220.5mm x 32mm x 28.1mm

T2N/1S/TP40/R Two-Part High Voltage DALI-2 Addressable

The T2N/1S/TP40/R, is a high-quality DALI-2 Self-Test 3-hour switchable emergency lighting module designed to suit a wide range of LED types, circuits and applications. Whilst the T2N/1S/TP40/R is designed for high voltage LEDs or longer linear applications, it can run certain self-driven lamps such as GU10s (subject to testing). The unit is designed to work with lithium iron phosphate (LiFePO4) batteries. The module automatically adjusts the output current to provide the best match between the battery and the load, providing maximum illumination whilst ensuring full battery duration. The pack features a bi-colour charge healthy/fault indicator LED on a flying lead. This range uses the latest LiFePO4 battery technology, dramatically reducing energy consumption and facilities management labour. If a DALI bus is not connected to the T2N/1S/TP40, then the unit will operate as a standalone self-test unit, reporting faults via a red indication of the charge LED. All our batteries feature temperature monitoring. In keeping with the latest update to BS EN 61347-2-7 Their associated modules will stop charging the cells if their case temperature falls below 0°C or rises above 55°C. The emergency packs will continue to operate where required, providing their is enough capacity remaining in the battery. Our lithium iron phosphate cells feature a low self-discharge of 5% per month.

Order Codes

Order CodeDescription
T2N/1S/TP40/R Module, three cell battery and charge LED indicator for 55-300 Volt LED loads
suitable for remote mounting adjacent to the luminaire.

T2N/1S/TP40/R Two-Part High Voltage DALI-2 Addressable

Specifications

  • Long Life LiFePO4 Batteries
  • DALI-2 Addressable Two-Part Conversion Kit
  • Slim Module Suitable for Smaller Apertures
  • Strain Relief Module and Batteries with Cables
  • Suitable for a Wide Range of LED Loads
  • Operates Loads between 55V and 300V
  • Average Emergency Output of 2.3W
  • Can Operate Some Self-Driven Lamps e.g., GU10 (subject to testing)
  • LiFePO4 Automatic Battery Protection and Recovery
T2N/1S/TP40/R
LED Voltage Range 55-300V
I Rated46mA - 7mA
P Rated3W - 80W
LED Voltage Limit350V
Bat. Current Limit1100mA
Mains Supply230-240V AC 50/60Hz
Power Rating (Charging)2.7W 16mA λ = 0.68
Power Rating (Standby)1.4W 12mA λ = 0.48
Charge Current225mA nominal
Recharge Period 24-hours
Battery Pack 3.2V 4.8Ah LiFePO4
Battery Cut Off2.5V
Ta5°C to 25°C
Tc5°C to 55°C
Integral Kit SizeModule - 266mm x 33.6mm x 22.5mm FC=259mm Battery - 220.5mm x 32mm x 28.1mm

Follow us on our socials