Liteplan Emergency lighting specialists

Mon - Thurs : 8:30 - 17:00 Fri : 8:30 - 14:00

Products

NLP/1 Basic Conversion

The NLP/1, is a high quality 3-hour switchable emergency lighting module designed to suit a wide range of LED types, circuits and applications. The unit is designed to work with lithium iron phosphate (LiFePO4) batteries and is available in 2 versions, one with PCB terminal blocks, for internal mounting inside a luminaire, or a pre-wired version for mounting remotely from the luminaire where integral mounting is not possible. The module automatically adjusts the output current to provide the best match between the battery and the load, providing maximum illumination whilst ensuring full battery duration. The module is supplied with a green charge healthy indicator LED. This range uses the latest LiFePO4 battery technology, dramatically reducing energy consumption and facilities management labour. All our batteries feature temperature monitoring. In keeping with the latest update to BS EN 61347-2-7 Their associated modules will stop charging the cells if their case temperature falls below 0°C or rises above 55°C. The emergency packs will continue to operate where required, providing their is enough capacity remaining in the battery. Our lithium iron phosphate cells feature a low self-discharge of 5% per month. Where space inside the luminaire is limited and the battery is deemed too tall, we are able to supply the NLP/1S/80. This is supplied with a slim LiFePO4 battery stick, ideal for slimmer luminaires. The NLP range has been independently certified by TÜV to ensure that the product, has been tested for safety and that it complies with the requirements of national and international regulations.

Order Codes

Order CodeDescription
NLP/1-KModule, single cell battery and charge LED indicator for 6-55 Volt LED loads
Suitable for mounting inside the luminaire
NLP/1S/80-KModule, three cell battery and charge LED indicator for 6-80V LED loads
Suitable for mounting inside the luminaire

NLP/1 Basic Conversion

Specifications

  • TÜV Tested and Certified
  • Slim Module Suitable for Linear Applications
  • Long Life LiFePO4 Batteries
  • Suitable for a Wide Range of LED Loads
  • Average Emergency Output for NLP/1 - 2.2W
  • Average Emergency Output for NLP/1S/80 - 2.6W
  • LiFePO4 Automatic Battery Protection and Recovery
NLP/1NLP/1S/80
LED Voltage Range6-55V 6-80V
I Rated323mA - 40mA385mA - 32mA
P Rated2.2W2.6W
LED Voltage Limit55V80V
Battery Discharge Current900mA1A
Mains Supply230-240V AC 50/60Hz
Power Rating - Charging2.7W 17mA λ = 0.67
Power Rating - Standby *1.2W 13mA λ = 0.40
Charge Current225mA nominal
Recharge Period24-hours
Battery Pack3.2V 3.8Ah LiFePO43.2V 4.8Ah LiFePO4
Battery Cut Off2.5V
Ambient Temperature (Ta)Battery and Module 5-35°C
Case Temperature (Tc)Battery 5-55°C, Module 5-70°C
Integral Module Size178mm x 30mm x 22.5mm FC=172mm

*Following its initial charge, the NLP/1 and NLP/1S will spend 90% of its operational life in standby mode.

Follow us on our socials