Products
- Got a question?
- Ask a product specialist...
- +44 (0) 1708 372 223
CT6S Twinspot Emergency Luminaire
The CT6S is a simple to install 3 hour Non-Maintained LED Emergency Twin Spot unit with an ingress protection rating of IP65. There are three versions available, basic emergency operation, DALI self-test operation, or wirelessly monitored operation with LiteMesh.
All our batteries feature temperature monitoring. In keeping with the latest update to BS EN 61347-2-7 Their associated modules will stop charging the cells if their case temperature falls below 0°C or rises above 55°C. The emergency packs will continue to operate where required, providing their is enough capacity remaining in the battery. Our lithium iron phosphate cells feature a low self-discharge of 5% per month.
Ordering Codes
| CT6S/6/LP/NM3 | Non-Maintained Standard Operation High Output | ||
|---|---|---|---|
| CT6S/6/LP/DA | Non-Maintained DALI Self-Test High Output | ||
| CT6S/6/LP/LMEM | Non-Maintained Wireless, for use with LiteMesh System |
CT6S Twinspot Emergency Luminaire
Specifications
- 610 lumen Output
- Tested by The LIA. Reports and ldt files available
- Extra Long Life LiFePO4 Batteries
- Simple Installation
- Deep Discharge Protection
- High Efficiency
- Low Maintenance
- Lightweight Construction
- Ingress Rating - IP65
- LiFePO4 Battery Protection with Automatic Cut-off
| Mains Supply | 230-240V AC 50/60 Hz |
|---|---|
| Power Rating Charged * | 1.2W 13mA λ = 0.43 |
| Power Rating - Charging * | 3.8W 23mA λ = 0.69 |
| Power Rating DALI - Charging * | 4.0W 21mA λ = 0.79 |
| Electrical Classification | Class 1 |
| Ambient Temperature | 0°C to +35°C |
| Duration | 3-Hours |
| Recharge Period | 24-Hours |
| Battery Type | LiFePO4 Cells |
| Battery Pack | 6.4V 4.8Ah |
| Charge Current | 225mA Nominal |
| Battery Discharge Current | 1.1A |
| Enclosure (L x W x H) | 300mm x 280mm x 95mm |
* Following its initial charge, the emergency control gear will spend 90% of its operational life in standby mode.
