Products
- Got a question?
- Ask a product specialist...
- +44 (0) 1708 372 223
CPH/MinEM Central Battery LED Strip System
The CPH unit is designed as a central battery driver with hold off (240V, 110V or 50V AC/DC) and powers a single dedicated 300lm LED strip in emergency, with the output held off whenever the 240V AC un-switched supply is present. At the point the un-switched supply is broken, the driver will accept the feed from the central battery and power the dedicated 52mm LED strip at 700mA, providing 385 lumen for the duration of the central battery feed.
This unit is for intermittent use. If being used as a slave, this must be considered. The unit is not for permanent use.
- 50V AC or DC 1 LED at 350mA or 700mA (2.5V-3.5V)
- 110V AC or DC 1-3 LEDs in series at 350mA or 700mA (2.5V-10V)
- 240V AC or DC 1-3 LEDs in series at 350mA or 700mA (2.5V-10V)
Ordering Codes
| CPH/MinEM | LED Strip with hold off driver to run 1No. 350mA or 700mA LED from 50V AC or DC Central Battery System or 1-3 LEDs in series from either 110V or 240V AC or DC Central Battery Systems. |
|---|
Can be housed in a remote enclosure for use with our dedicated emergency LEDs where required. Please see S-CPH for details.
CPH/MinEM Central Battery LED Strip System
Specifications
- Suitable for 50V, 110V & 240V Central Battery Systems
- Operates a dedicated emergency LED Strip
- Suitable to be housed integrally to a luminaire
- Emergency lumen output of 385lm.
- Can be housed within a remote enclosure where required
To determine the power drawn from the central battery system in each scenario, please use the below chart in your calculations:
|
Supply Voltage |
Output Current (mA) |
Output load |
Supply Current (mA rms) |
Supply Power (W) |
Supply power factor |
Supply VA |
|
240V AC |
700 |
LED Strip |
36 |
3.60 |
0.41 |
8.8 |
|
240V DC |
14 |
3.36 |
– |
– |
||
|
110V AC |
54 |
3.50 |
0.58 |
6.1 |
||
|
110V DC |
30 |
3.30 |
– |
– |
||
|
50V AC |
135 |
4.40 |
0.65 |
6.9 |
||
|
50V DC |
78 |
3.90 |
– |
– |
||
|
|
|
|
|
|
|
|
