Liteplan Emergency lighting specialists

Mon - Thurs : 8:30 - 17:00 Fri : 8:30 - 14:00

Products

TLP/2 High Output, High Voltage Basic Conversion

The TLP/2 is a high output 3-hour switchable emergency lighting module designed to suit a wide range of LED types, circuits and applications. Whilst the TLP/2 is designed for high voltage LEDs or longer linear applications, it can run certain self-driven lamps like GU10s (subject to testing). The unit is designed to work with lithium iron phosphate (LiFePO4) batteries and is available in 2 versions, one with a single thicker battery, with the TLP/2S with twin slimmer stick batteries. The module automatically adjusts the output current to provide the best match between the battery and the load, providing maximum illumination whilst ensuring full battery duration. The module is supplied with a green charge healthy indicator LED. This range uses the latest LiFePO4 battery technology, dramatically reducing energy consumption and facilities management labour. All our batteries feature temperature monitoring. In keeping with the latest update to BS EN 61347-2-7 Their associated modules will stop charging the cells if their case temperature falls below 0°C or rises above 55°C. The emergency packs will continue to operate where required, providing their is enough capacity remaining in the battery. Our lithium iron phosphate cells feature a low self-discharge of 5% per month. The TLP range has been independently certified by TÜV to ensure that the product, has been tested for safety and that it complies with the requirements of national and international regulations.

Order Codes

Order CodeDescription
TLP/2/KModule, two cell battery and charge LED indicator for 50-300 Volt LED loads
suitable for mounting inside the luminaire
TLP/2S/KModule, two cell battery and charge LED indicator for 50-300 Volt LED loads
suitable for mounting inside the luminaire

TLP/2 High Output, High Voltage Basic Conversion

Specifications

  • TÜV Tested and Certified
  • Slim Module Suitable for Linear Applications
  • Long Life LiFePO4 Batteries
  • Available as a Strain Relief Module with Cables
  • Suitable for a Wide Range of LED Loads
  • Operates Loads between 50 and 300V
  • Can operate some Self Driven Lamps like GU10 (subject to testing)
  • TLP/2 Average Emergency Output of 4.4W
  • TLP/2S Average Emergency Output of 5.4W
  • LiFePO4 Automatic Battery Protection and Recovery
TLP/2TLP/2S
LED Voltage Range50-300V
I Rated86mA - 14mA102mA-17mA
P Rated4.3W5.1W
Open Circuit Voltage350V
Battery Current Limit900mA1.1A
Mains Supply230-240V AC 50/60Hz
Power Rating (charging)3.7W 20mA λ = 0.74
Power Rating (standby) *1.4W 10mA λ = 0.57
Charge Current225mA nominal
Recharge Period24 hours
Battery Pack6.4V 3.8Ah LiFePO46.4V 4.8Ah LiFePO4
Battery Cut Off5V
Ambient Temperature (Ta)5°C to 35°C
Case Temperatures (Tc)Module 5°C to 70°CBattery 5°C to 55°C
Integral Kit SizeModule - 213mm x 30mm x 22.5mm FC=207mm Battery - 157mm x 26.5mm x 28mm FC=150mmModule - 213mm x 30mm x 22.5mm FC=207mm Battery - 2 x 230mm x 24mm x 22mm FC=220mm

* following its initial charge, the TLP/2 and TLP/2S will spend 90% of its operational life in standby mode.

Follow us on our socials